|
The
School of Engineering enrolls about 40% of the University's
undergraduate and postgraduate students. It comprises the Departments
of Chemical Engineering, Civil Engineering, Computer Science, Electrical
and Electronic Engineering, Industrial Engineering and Engineering Management,
and Mechanical Engineering. Each department offers undergraduate programs
leading to the BEng degree and postgraduate programs leading to the research-based
degrees of Master of Philosophy (MPhil) and Doctor of Philosophy (PhD),
and course-based degree of Master of Science (MSc). Besides, the School
offers Master of Technology Management (MTM) Programs.
In addition to these
disciplinary programs, an interdisciplinary BEng program in Computer Engineering,
jointly administered by the Departments of Computer Science, and Electrical
and Electronic Engineering, is also offered. Other interdisciplinary degree
programs jointly offered by the Schools of Science and Engineering include
MSc in Biotechnology, MSc in Materials Science and Engineering, and MSc
in Environmental Science and Engineering.
The School of Engineering
also offers two undergraduate minor programs in Information
Technology, and Technology Management to engineering
undergraduate students to equip them with knowledge and management skills
in technology areas. With the approval of the major department, undergraduate
students can graduate with dual program designation, if they can complete
the requirements of the two undergraduate programs within the normal period
of study.
The undergraduate
curricula in the School of Engineering are broad-based with special attention
given to laboratory skills, computer applications and design techniques.
While undergraduate students in engineering take courses offered by their
major departments, they also take at least 12 credits of general education
courses offered by other schools. All engineering students will participate
in a three-year immersion-style practical English language enhancement
program. This mix of courses provides students with an integrated and
modern view of the discipline. To complement academic training, the Industrial
Training Program offers structured training in a simulated industrial
environment, which helps students satisfy the training requirements of
professional engineering bodies. Together, these reflect the fundamental
facts that the mission of engineering is to produce and synthesize, and
that engineering practice must be compatible with economic realities and
the social environment.
Research and postgraduate
education form a fundamental component of the School's mission. While
supervised research is the backbone of the training for students pursuing
MPhil and PhD degrees, all postgraduate students are required to undertake
some course work.
Each department in
the School of Engineering is established with state-of-the-art laboratories
and computing facilities for teaching and research purposes. These facilities
are supported by the University's central facilities, including the Library,
the Center for Enhanced Learning and Teaching, the Information Technology
Services Center, the Materials Characterization and Preparation Facility,
the Advanced Engineering Materials Facility, the Microelectronics Fabrication
Facility, the Computer Aided Design and Manufacturing Facility, the Electrical
and Mechanical Services Facility, the CLP Power Wind/Wave Tunnel Facility,
and the Geotechnical Centrifuge Facility.
The
Undergraduate Minor Program in Information Technology
Any undergraduate
student studying in the Departments of Chemical Engineering, Civil
Engineering, Industrial Engineering and Engineering Management,
or Mechanical Engineering with a CGA of 8.5 (B+) or above may apply.
They must declare their intention to enroll in the minor program
no earlier than the second semester of their first year of study
but no later than the last day of the add/drop period in the first
semester of their final year of study. Students who wish to withdraw
from the minor program should apply before the last day of the add/drop
period in the first semester of their final year of study.
The Minor Program
in Information Technology requires a minimum total of 18 credits
taken from the following list of courses. Out of these 18 credits,
at least 6 credits must be at the 200-level or above. Out of these
6 credits at the 200-level or above, at least 3 credits must be
at the 300-level or above. Zero-level courses and courses offered
by the student's major department cannot be used to fulfill the
minor program requirements.
Required
Courses: COMP 102, COMP 103 and COMP 171
Elective
Courses: To be chosen from amongst any COMP courses (except
COMP 101), or any courses from the following list of ELEC courses:
ELEC 101, ELEC
151, ELEC 211, ELEC 212, ELEC 214, ELEC 314,
ELEC 315, ELEC 317, ELEC 331, ELEC 332, ELEC 333, ELEC 343
Students are
recommended to take elective courses focused on one of the following
areas: Software Engineering, Database Management, Multimedia Computing,
and Networking. They are encouraged to seek advice from the academic
counselors on selection of the elective courses.
To graduate
with a minor in Information Technology, the students must be enrolled
in the minor program; complete all of its requirements, as well
as all the requirements of their major program of study; and attain
an average of at least 5.5 (C+) in courses taken within the minor
program.
|
The
Undergraduate Minor Program in Technology Management
Any undergraduate
Engineering student (except those studying in the Department of
Industrial Engineering and Engineering Management) with a CGA of
8.5 (B+) or above may apply. They must declare their intention to
enroll in the minor program no earlier than the second semester
of their first year of study but no later than the last day of the
add/drop period in the first semester of their final year of study.
Students who wish to withdraw from the minor program should apply
before the last day of the add/drop period in the first semester
of their final year of study.
The Minor Program
in Technology Management requires a minimum total of 18 credits
taken from the following list of courses. Out of these 18 credits,
at least 6 credits must be at the 200-level or above. Out of these
6 credits at the 200-level or above, at least 3 credits must at
the 300-level or above. Zero-level courses and courses offered by
the student's major department cannot be used to fulfill the minor
program requirements.
Required
Courses:
IEEM 120, IEEM 223; and
IEEM 213 (for CENG, CIVL and MECH students)
or IEEM 365 (for COMP, CPEG and ELEC students)
Elective
Courses:
To be chosen from amongst the following list of courses:
CIVL 345,
IEEM 115, IEEM 201, IEEM 225, IEEM 227, IEEM 241, IEEM 245, IEEM
310, IEEM 313, IEEM 317, IEEM 331, and at most one course from CENG
152, CIVL 141, MECH 106, MECH 152
Students are
encouraged to seek advice from the academic counselors on selection
of the elective courses.
To graduate
with a minor in Technology Management, the students must be enrolled
in the minor program; complete all of its requirements, as well
as all the requirements of their major program of study; and attain
an average of at least 5.5 (C+) in courses taken within the minor
program
Continuing
and Professional Education Programs (CPEP)
Associate
Director, Continuing Education and External Development:
Tin-yu WANG, BEng, MEng McMaster; MPEO
In order to
support the University's mission to contribute to the economic and
social development of Hong Kong and her region, the School of Engineering
has focused its Continuing and Professional Education Programs on
the diffusion of new technologies in Engineering and Management.
This focus is reflected in the participation of the School's faculty
members and technical staff as featured speakers in their own areas
of specialism. In general, programs are designed to provide on-the-job
development of professionals in new areas of high technologies at
the postgraduate level. Most programs are conducted on weekends.
Industrial flavored laboratory demonstrations and hands-on exercises
are frequently incorporated in these programs to enhance the learning
experience of students.
A full spectrum
of short programs on a wide range of engineering and management
topics is offered all year round for open enrolment. These non-credit
programs are aimed at orientating practicing engineers and professionals
with the latest developments in technology. Program materials are
generally condensed to within two to five days. These programs include
topics that fit under the general themes of Information Technology,
Telecommunication and Networking Technology, Electronic Technology,
Logistics and Supply Chain Management, Engineering Management, Manufacturing
Technology, Product Design Technology, Environmental Technology,
Structural Engineering, Geotechnical Engineering, Construction Management,
Building Services Technology, and Advanced Materials Technology.
In response
to the increasing needs of industries for tailor-made programs,
the School designs programs to meet company needs. Programs spanning
from one day to half a year have been delivered for a number of
government departments, local industries, and multinational corporations
both in Hong Kong and in China.
In addition
to short programs and tailored-made programs, the School offers
a 6-month part-time Professional Diploma in Computer Forensics (PDCF)
program and a 12-month part-time Graduate Diploma in Computer Forensics
(GDCF) program to deliver cutting-edge technology and legal practices
in the computer security and forensics field. Both diploma programs
are the first and only such programs offered in Hong Kong and in
most parts of Asia. Moreover, the School also offers a 10-month
part-time Executive Diploma in Transportation Logistics Management
(EDTLM) program to top executives and managers from the transportation
and logistics field. The School offers a broad spectrum of continuing
and professional education in engineering and management (MTM, GDCF,
PDCF, EDTLM and short programs) for executives and technical professionals
to suit various levels of interests, experience, academic standings
and aspirations that engineering professionals may have.
Graduate
Diploma Program in Computer Forensics (GDCF)
Program
Director:
Samuel T. CHANSON, BSc Hong Kong; MSc, PhD Univ of California,
Berkeley
(Professor of Computer Science)
The Graduate
Diploma Program in Computer Forensics aims to achieve the following
objectives:
- To work
to support a safe, secure, efficient and reliable environment
for E-commerce activities in Hong Kong.
- To provide
training and accreditation for forensic examination of computers,
network security and investigation of computer crimes.
- To establish
an internationally recognized Standard of Practice for the investigation
of computer crime, seizure, handling, recovery and presentation
of computer and digital evidence for criminal and civil court
proceedings.
The program
is designed for business executives, managers, accountants, computer
auditors, lawyers, government officials, law enforcement agents,
IT strategists, intellectual property developers/providers, computer
security professionals, system administrators, and researchers and
developers in information security, e-commerce security, and digital
evidence areas. This program, with most classes held on Saturdays,
allows IT managers and professionals to pursue continuing education
with a minimum interruption to their careers.
Admission
Requirements
Applicants for
admission to the Graduate Diploma Program in Computer Forensics
(GDCF) must possess a bachelor's degree or equivalent in a relevant
discipline from a recognized university. Applicants should also
be active full-time professionals working in an IT-related environment.
Program
Fees for 2001-02 Academic Year
The tuition
fee for the Graduate Diploma Program in Computer Forensics (GDCF)
is $90,000.
Program Requirements
The Graduate
Diploma Program in Computer Forensics comprises six 3-credit postgraduate
level courses. Participants are required to complete a minimum of
15 credits of course work from the following list. Program participants
must complete the examinations and assignments with approved grades
to earn the respective credits.
|
MTMI
|
510 |
Internet,
E-Commerce, and IT Security |
[3-0-0:3] |
|
MTMI
|
511 |
Computer
Forensics, Digital Evidence, and Legal Issues |
[3-0-0:3] |
|
MTMI
|
512 |
Network
Security and Cyber Crime Investigation |
[3-0-0:3] |
|
MTMI
|
513 |
Computer
Forensics on Computer Systems I |
[3-0-0:3] |
|
MTMI
|
514 |
Computer
Forensics on Computer Systems II |
[3-0-0:3] |
|
MTMI
|
515 |
Technology
Specific Issues in Computer Forensics Investigations |
[3-0-0:3] |
|
|
|